Sanitary tri-clamp gaskets are used to make a secure, leak-proof connection between clamp fittings.A variety of materials are available for selection depending upon medium used inline processing. Gaskets range in size from 1/2 inch to 12 inches. If you would like a copy of a gaskets certificate, please ask for them at the time of order. Certificates are specific per lot of gaskets. Much like a heat number for fittings, gaskets have what is called a lot number. We don’t log these numbers at the time of order but we do include them on the packaging if you need the certificate after receiving them. Please see Compound Selection Guide for compatibility information. Gasket Cleaning & Maintenance
|Size (Tube OD)||Material|
Tri-Clamp Gasket Sizes & Dimensions
Tri-Clamp Gasket Comparison Guide
|Gasket||Temperature Range||Recommended Usage||Not Recommended||Industry||Certification Approval|
|Buna (Nitrile)||Standard: -35°F to 250°F (-37°C to 121°C)||Water, Oils, Fuels||Ketones, Strong Acids, Sunlight, Ozone, Weathering||Food & Beverage||FDA Approved|
|EPDM (Ethylene Propylene)||Standard: -65°F to 300°F (-54°C to 149°C)||Sunlight, Weathering, Hot Water, Steam, Select Acids/Bases, Alcohols||Oils, Fuels||Bio-Pharmaceutical, Food & Beverage, Drinking Water||USP Class VI Tested|
|PTFE (Teflon®)||Standard: -100°F to 450°F (-74°C to 232°C)||Chemical, Heat, Pressure Applications||Stretching, Elasticity||Chemical Processing||USP Class VI Tested|
|FKM (Viton®)||Standard: -15°F to 437°F (-26°C to 222°C)||Vacuum, Most Acids / Chemicals, Oils, Fuels||Ketones, Ammonia, Hot Water / Steam||Chemical Processing||USP Class VI Tested|
|Silicone||Standard: -65°F to 450°F (-53°C to 232°C)||Food processing machinery and industrial oven seals in the food industry. In the medical industry, they are used for medical and healthcare equipment.||Ammonium Nitrite, Barium Sulfate, Milk||Benzene, Butane, Freon||USP Class VI Tested|
Watch How to Measure Tri-Clamp Fittings
Tri-Clamp Fittings and Gasket Sizing Guide
|Sanitary Size||Flange OD ( ? )||ID of Tube ( ? )||OD of Tube ( ? )|
Frequently Asked QuestionsRead our guide to Frequently Asked Questions about Tri-Clamp Fittings
GTCB-050 GTCB-075 GTCB-100 GTCB-1000 GTCB-1200 GTCB-150 GTCB-200 GTCB-250 GTCB-300 GTCB-400 GTCB-600 GTCB-800 GTCE-050 GTCE-075 GTCE-100 GTCE-1000 GTCE-1200 GTCE-150 GTCE-200 GTCE-250 GTCE-300 GTCE-400 GTCE-500 GTCE-600 GTCE-800 GTCT-050 GTCT-075 GTCT-100 GTCT-1000 GTCT-1200 GTCT-150 GTCT-200 GTCT-250 GTCT-300 GTCT-400 GTCT-600 GTCT-800 GTCV-050 GTCV-075 GTCV-100 GTCV-1000 GTCV-1200 GTCV-150 GTCV-200 GTCV-250 GTCV-300 GTCV-400 GTCV-600 GTCV-800 40MP-12-TEF 40MP-1-TEFLON 40MP-1.5-TEFLON
Questions & Answers 10
I am working on a design that requires somewhat tight tolerance on positioning of a tri-clamp end cap. I have not found a good reference for recommended/expected gasket compression. This will be a 10” BUNA sanitary gasket, do you have any guidance you can share?
Q I am working on a design that requires somewhat tight tolerance on positioning of a tri-clamp end...... Read moreA I don't have additional guidance that I can provide other than overtightening the gaskets can cause them to warp and possibly leak. Tri-Clamp gasket connections should be hand tightened just beyond a range I would refer to as "snug". The gasket is able to do the job it was intended for, it really just needs to be held firmly in place by the clamp.
I would like to request a sample for this gasket_SKU: 40MP-1-VITON
Q I would like to request a sample for this gasket_SKU: 40MP-1-VITONA Sure, we can do that for you. I'll reach out to you for additional contact information.
Best material for high pressure, 750 psi and temperature, 200F?
Q Best material for high pressure, 750 psi and temperature, 200F?A At that temperature, you can utilize any of our gaskets. For that level of pressure, we recommend our double-pin high-pressure clamp.
Are there any animal origin materials used in your gaskets?
Q Are there any animal origin materials used in your gaskets?A Our gaskets are comprised of 100% synthetic materials.
What is the benefit of Tri-Clamp Envelope gaskets?
Q What is the benefit of Tri-Clamp Envelope gaskets?A The reason for choosing the Envelope Gasket is because Teflon, by itself, is kind of a rigid material. EPDM on the other hand is very flexible. This gasket is an EPDM gasket center with Teflon outside. It works great in environments where you need the durability to stand up to harsh chemicals that Teflon provides but the flexibility that EPDM offers.
These gaskets are class IV rated. What does class IV rating mean?
Q These gaskets are class IV rated. What does class IV rating mean?A Class IV gasket rating is a certificate stating that the material used within gaskets is not harmful to living things. While gasket material should not wind up in the manufacturer's final product if it did find its way to the consumer it would not be harmful to ingest.
Best gasket material for high proof ethanol?
Q Best gasket material for high proof ethanol?A We recommend EPDM gasket material for any alcohol process line implementations including ethyl alcohol.
I’ve noticed leaking at a couple of connection points. All tri-clamp fittings and gaskets are new. Clamps are tight. What can I do to eliminate the leakage?
Q I’ve noticed leaking at a couple of connection points. All tri-clamp fittings and gaskets are new...... Read moreA With regards to any leaking tri-clamp fittings, start by checking that the gasket is properly seated in the grooves. Depending upon the material of gasket, sometimes less flexible gaskets can bend/flex in a bad way if it's overtightened. I would check to make sure that you are not going about 1 full turn past "snug". Give these things a try and see if they help.
What is the country of origin for these gaskets?
Q What is the country of origin for these gaskets?A The country of origin for our tri-clamp gaskets is the United States. For your reference, the HTS code is 3926.90.4500.
Are the PTFE tri-clover gaskets FDA approved?
Q Are the PTFE tri-clover gaskets FDA approved?A Yes! Our tri-clamp gaskets are approved by the Food & Drug Administration for use in the production of food, beverage and pharmaceutical industries. We can supply a certificate stating as such upon demand. Additionally, these gaskets are also Class VI tested by USP to be in compliance with their testing criteria. We can also supply a certificate stating as such.