One Piece Threaded Ball Valve
One Piece Threaded Ball Valve
- Working Pressure: 1000 PSI WOG.
- Working Temp.: -4°F to 392°F.
- Blow-out proof stem.
- Locking device.
- Thread type: ASTM B1.20.1 (NPT).
- Reduced Port
Description
One piece reduced port ball valves offer a cost effective line solution where positive shut-off is necessary.
Our fully encapsulated T316 stainless steel ball valves are easy to operate and can maintain and regulate high fluid pressures, volumes, and temperatures.One Piece Threaded Ball Valve Part Numbers & Dimensions
| Size (NPS) | Part Number | Dimensions | |||
| D | L | W | H | ||
| 1/4" | BV1-025 | 0.200 | 1.540 | 2.800 | 1.300 |
| 3/8" | BV1-0375 | 0.280 | 1.730 | 3.580 | 1.380 |
| 1/2" | BV1-050 | 0.360 | 2.170 | 3.740 | 1.570 |
| 3/4" | BV1-075 | 0.490 | 2.320 | 3.740 | 1.730 |
| 1 " | BV1-100 | 0.590 | 2.720 | 4.450 | 1.970 |
| 1-1/4" | BV1-125 | 0.790 | 3.030 | 4.450 | 2.240 |
| 1-1/2" | BV1-150 | 0.980 | 3.190 | 5.550 | 2.520 |
| 2 " | BV1-200 | 1.260 | 3.820 | 5.550 | 2.680 |
Questions & Answers 6
Questions and answers of the customers
-
Are these valves certified for drinking water applications?
-
Q Are these valves certified for drinking water applications?A These valves are suitable for use with water. They are manufactured from 316L Stainless Steel which is corrosion resistant. They are not, however, certified by any governing body as being suitable for water applications.
Is this valve suitable for gasoline service?
-
Q Is this valve suitable for gasoline service?A The one-piece threaded ball valve is not rated to handle gasoline material. You may find what you're looking for at McMaster Carr. Searching for keyword/sku: 7910K83
will a 7/8 wrench work with a 3/4 valve to install it?
-
Q will a 7/8 wrench work with a 3/4 valve to install it?A
These fittings are designed to be hand-tightened. You can use hand tools if desired but it is important to not overtighten any of the fittings.
Is there a CAD file available for this valve? I would like to integrate it into my assembly and a pre-made component would be helpful.
-
Q Is there a CAD file available for this valve? I would like to integrate it into my assembly and a...... Read moreA
I'm sorry but we do not have any associated CAD files for our One-Piece Threaded Ball Valves available.
Are these valves rated for 450psi nitrogen at 100 degrees F?
-
Q Are these valves rated for 450psi nitrogen at 100 degrees F?A These valves have an operating working pressure of 1000 PSI with a temperature range of -4°F to 392°F.
Are these valves full port?
-
Q Are these valves full port?A These valves can open up to allow 100% material flow-through rates.
