SKUs available on this product page

SBSA-2X2.5-316, SBSA-.75X2-316, SBSA-1X2.5-316, SBSB-1X2.5-316, SBSC-1X2.5-316, SBSA-1X2.5-D, SBSA-1.5X2.5-316, SBSB-1.5X2.5-316, SBSC-1.5X2.5-316, SBSA-1.5X2.5-D, SBSA-1.5X3.5-316, SBSB-1.5X3.5-316, SBSA-1.5X3.5-D,

CIP Spray Balls (SBSA)

  • Stationary CIP Spray Ball
  • Available in 316L Stainless Steel alloy
  • Mounted on to process-line tubing
  • Available in multiple spray patterns
Quantity - +

Polished stainless steel clean-in-place spray balls are used to clean process tanks with a variety of patterns

Sanitary spray balls are specialized cleaning devices used in industries such as food and beverage, pharmaceuticals, and biotechnology to clean and sanitize tanks, vessels, and other equipment in a sanitary and efficient manner. They are designed to ensure that the interior surfaces of these vessels remain free from contamination, residue, and microorganisms.

Tube ends of the spray ball are slightly larger than the noted Tube OD to slip over butt-weld end. A locking pin (included) holds the stationary spray ball in place.
Spray Ball Patterns

SPECS
3/4" x 2" Spray Ball
1" x 2 1/2" Spray Ball
1 1/2" x 2 1/2" Spray Ball
1 1/2" x 3 1/2" Spray Ball
2" x 2 1/2" Spray Ball

 

Part Numbers & Dimensions

Size(Tube OD) x Ball Size Spray Pattern Part Number Dimensions
A B C D
1" x 2 1/2" A - 360 Degrees SBSA-1X25 1.109 1.031 3.500 2.500
1 1/2" x 2 1/2" A - 360 Degrees SBSA-15X25 1.672 1.563 3.500 2.500
1 1/2" x 3 1/2" A - 360 Degrees SBSA-15X35 1.672 1.563 4.750 2.500

Additional information

Line Drawings

SKUDescriptionLine Drawing
SBSA-.75X2-316

3/4″ Tube OD x 2″ Slip-On Spray Ball, 360 Pattern

Request Line Drawing
SBSA-1.5X2.5-316

1 1/2″ Tube OD x 2 1/2″ Spray Ball, 360 Pattern

PDF
SBSA-1.5X2.5-D

1 1/2″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Side

Request Line Drawing
SBSA-1.5X3.5-316

1 1/2″ Tube OD x 3 1/2″ Spray Ball, 360 Pattern

Request Line Drawing
SBSA-1.5X3.5-D

1 1/2″ Tube OD x 3 1/2″ Spray Ball, 180 Degrees Side

Request Line Drawing
SBSA-1X2.5-316

1″ Tube OD x 2 1/2″ Spray Ball, 360 Pattern

Request Line Drawing
SBSA-1X2.5-D

1″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Side

Request Line Drawing
SBSA-2X2.5-316

2″ Tube OD x 2 1/2″ Slip-On Spray Ball, 360 Pattern

PDF
SBSB-1.5X2.5-316

1 1/2″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Upper

Request Line Drawing
SBSB-1.5X3.5-316

1 1/2″ Tube OD x 3 1/2″ Spray Ball, 180 Degrees Upper

Request Line Drawing
SBSB-1X2.5-316

1″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Upper

Request Line Drawing
SBSC-1.5X2.5-316

1 1/2″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Lower

Request Line Drawing
SBSC-1X2.5-316

1″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Lower

Request Line Drawing

    What's the finish on your spray balls?
  1. Q What's the finish on your spray balls?
    A The finish on our spray balls is 32Ra.
  2. Do they come in FMPT or MPT?
  3. Q Do they come in FMPT or MPT?
    A These spray balls slide over existing tubing and are secured with a pin. Due to this configuration, we are unable to add any kind of alternative connection to them.
  4. Do you have flow rate/pressure curves for this spray ball?
  5. Q Do you have flow rate/pressure curves for this spray ball?
    A

    We do not have flow rate/pressure curves for our spray balls.  The typical gallons per minute for these items is 40GPM.  The average pressure is around 25PSI.

  6. Do spray balls come with MTRs?
  7. Q Do spray balls come with MTRs?
    A Yes, our spray balls do come with Material Test Reports (MTRs) upon request.
  8. Are these spray balls 3A certified?
  9. Q Are these spray balls 3A certified?
    A Our spray balls are not manufactured in accordance with 3A Standards.