Tri-Clamp Thermometer Cap (23BMP)
Tri-Clamp NPT Threaded Thermometer Cap for measuring tube mediaThermometer Caps, or Instrument Caps, are constructed from 304 or 316 stainless steel and available in tube sizes ranging from 1 - 4" in diameter. Thermometer gauges sold separately. Note: Additional NPT sizes available upon request. Sanitary tri-clamp fittings allow for easy assembly and breakdown of line process equipment. Sanitary Fittings recommends using this product with a single-pin clamp and clamp gaskets for a secure connection. Learn more about tri-clamp thermowells.
Request Material Test Reports (MTRs)
Thermometer Caps Part Numbers & Dimensions
Tri-Clamp Thermometer Cap Line Drawing
|Tri-Clamp Size x NPT Size||Part Number||Dimensions|
|1" x 1/2"||23BMP-1X.50-304||23BMP-1X.50-316||0.625||1.984|
|1-1/2" x 1/2"||23BMP-1.5X.50-304||23BMP-1.5X.50-316||0.625||1.984|
|1-1/2" x 3/4"||23BMP-1.5X.75-304||23BMP-1.5X.75-316||0.625||1.984|
|2 " x 3/4"||23BMP-2X.75-304||23BMP-2X.75-316||0.625||2.516|
|2-1/2" x 3/4"||23BMP-2.5X.75-304||23BMP-2.5X.75-316||0.625||3.047|
|3" x 3/4"||23BMP-3X.75-304||23BMP-3X.75-316||0.625||3.579|
|4" x 3/4"||23BMP-4X.75-304||23BMP-4X.75-316||0.625||4.682|
Watch How to Measure Tri-Clamp Fittings
Tri-Clamp Fittings and Gasket Sizing Guide
|Sanitary Size||Flange OD ( ? )||ID of Tube ( ? )||OD of Tube ( ? )|
Frequently Asked QuestionsRead our guide to Frequently Asked Questions about Tri-Clamp Fittings
Questions & Answers 4
Questions and answers of the customers
Are there price breaks for ordering a certain quantity of these fittings?
Q Are there price breaks for ordering a certain quantity of these fittings?A Yes, we do offer quantity breaks. Please reach out to us for more information.
Is the material AISIS316L labeled as EN 1.4435? Since the product has 3A certificate, can you confirm the surface roughness Ra is < 0,6 micrometers?
Q Is the material AISIS316L labeled as EN 1.4435? Since the product has 3A certificate, can you con...... Read moreA The description of this product was incorrectly written as being manufactured in accordance with 3A Standards. The interior threading on this thermometer cap is not manufactured in accordance with 3A Sanitary Standards. The product description has been updated.A The description of this product was incorrectly written as being manufactured in accordance with 3A Standards. The interior threading on this thermometer cap is not manufactured in accordance with 3A Sanitary Standards. The surface finish of this item is 32Ra. The product description has been updated.
Can I order these thermometer caps blank?
Q Can I order these thermometer caps blank?A Absolutely. Customers request this all the time. I usually charge $2 less per blank cap because labor for drilling NPT is included with these parts. If you'd like to order a blank thermometer cap please contact me to let me know or you can add this information to your order processing notes during checkout. I can either refund the money or create a special invoice order for the correct price.
Are there enough threads to attach pipes to both ends at the same time? I need to put a quick disconnect on top and a clean in place spray ball on the bottom.
Q Are there enough threads to attach pipes to both ends at the same time? I need to put a quick dis...... Read moreA The overall thickness of these thermometer caps is just over 1/2". So while it is possible to use two threaded apparatus on this fitting you might not achieve the best results. You're looking at about 1/4" of threading per item. This may results in less than optimal secure connection for both products.