SKUs available on this product page

16AMPVB-25-316, 16AMPVB-3-316, 16AMPVB-4-316, 16AMPVB-2-316, 16AMPVB-1.5-316,

Tri-Clamp Vacuum Breaker Vent Valve (16AMPVB)

  • Sanitary Pressure Relief Valves
  • Tri-Clamp fitting sizes 1.5″ – 4″
  • Stainless Steel 316 Alloy Cap
  • Includes:  Nylon Seat; Buna O-Ring Seal
  • Valve breaks when the system drops below atmospheric pressure.
Quantity - +

Relieve tank pressure with stainless steel sanitary vacuum breaker valve

The sanitary vacuum breaker valve is designed to prevent vacuum conditions from occurring in tubing or tanks. These valves are typically mounted
at critical points throughout the processing system and allow for the inflow of atmospheric air to alleviate vacuum conditions.

Draining of tanks can cause pressure differences between the inside of tanks and the outside air causing a downward force. This negative pressure can severely damage tanks causing catastrophic loss of equipment. When positive pressure is restored in the tank, the valve can be closed again to form a tight seal.

Use this product in conjunction with sanitary gaskets and single pin heavy duty clamps.

Additional information

Line Drawings

SKUDescriptionLine Drawing
16AMPVB-1.5-316

1 1/2″ Tri-Clamp Vacuum Breaker Valve, 316

PDF
16AMPVB-2-316

2″ Tri-Clamp Vacuum Breaker Valve, 316

Request Line Drawing
16AMPVB-25-316

2 1/2″ Tri-Clamp Vacuum Breaker Valve, 316

PDF
16AMPVB-3-316

3″ Tri-Clamp Vacuum Breaker Valve, 316

Request Line Drawing
16AMPVB-4-316

4″ Tri-Clamp Vacuum Breaker Valve, 316

PDF

    What is the cleanability of these? Can they be washed in a parts washer or CIP/SIP'ed?
  1. Q What is the cleanability of these? Can they be washed in a parts washer or CIP/SIP'ed?
    A A parts washer is recommended to properly clean the tri-clamp vacuum breaker valve. The product is spring loaded needs to be taken apart to clean 100%.
  2. Can these come with a better surface finish such as 15 or 20Ra? Can these be CIP'd and/or SIP'd? Or run through a Parts Washer and/or Autoclave, and how are they activated for these cycles
  3. Q Can these come with a better surface finish such as 15 or 20Ra? Can these be CIP'd and/or SIP'd? ...... Read more
    A Unfortunately, for this particular item we are unable to provide a better surface finish (Ra) than the standard 32Ra.
  4. I have an application where there is a slight vacuum pressure coming from the outside of the system. Roughly 1.5PSI. Are tri-clamp fittings able to handle this type of vacuum pressure?
  5. Q I have an application where there is a slight vacuum pressure coming from the outside of the syst...... Read more
    A While tri-clamp fittings are not rated for vacuum applications, they should be able to withstand an environment of up to 2PSI vacuum pressure without issue.
  6. Do you have a data sheet for : 4″ Tri-Clamp Vacuum Breaker Valve, 316 SKU 16AMPVB-4-316
  7. Q Do you have a data sheet for : 4″ Tri-Clamp Vacuum Breaker Valve, 316 SKU 16AMPVB-4-316
    A All available information that we have for this product can be found on this product page.
  8. Do you have a spec sheet for this product?
  9. Q Do you have a spec sheet for this product?
    A We don't have much beyond what is already published on the website. I will send you a PDF copy for additional material.