SKUs available on this product page

A80MPU-4, A80MPU-3, A80MPU-2.5, A80MPU-1.5, A80MPU-1, A80MPU-2,

Tri-Clamp Orifice Plate Gaskets (A80MP)

Please see Compound Selection Guide for compatibility information.
Temperature & Usage Guide

  • 304 Stainless Steel Orifice Plate Gasket
Quantity - +

Orifice plate gaskets improve system performance, adjust flow rates, balance back flow and equalize back pressure during SIP procedures.

Tri clamp gaskets are used to make a secure, leak proof connection between clamp fittings.  A variety of materials is available for selection depending upon medium used in line processing. Gaskets range in size from 1 inch to 4 inches.  Please see Compound Selection Guide for compatibility information.

Achievable benefits while maintaining sanitary conditions. Standard with 1/8” concentric bore.

Size
(Tube OD)
Material
Buna EPDM Teflon® Viton®
1 " A80MP-1X.125-BUNA NA NA NA
1-1/2" A80MP-1.5X.125-BUNA NA NA NA
2" A80MP-2X.125-BUNA NA NA NA
2-1/2" A80MP-2.5X.125-BUNA NA NA NA
3 " A80MP-3X.125-BUNA NA NA NA
4 " A80MP-4X.125-BUNA NA NA NA

 

 

Tri-Clamp Gasket Comparison Guide

Gasket Temperature Range Recommended Usage Not Recommended Industry
Buna (Nitrile) Standard: -35°F to 250°F (-37°C to 121°C) Water, Oils, Fuels Ketones, Strong Acids, Sunlight, Ozone, Weathering Food & Beverage
EPDM (Ethylene Propylene) Standard: -65°F to 300°F (-54°C to 149°C) Sunlight, Weathering, Hot Water, Steam, Select Acids/Bases, Alcohols Oils, Fuels Bio-Pharmaceutical, Food & Beverage, Drinking Water
PTFE (Teflon®) Standard: -250°F to 450°F (-157°C to 232°C) Chemical, Heat, Pressure Applications Stretching, Elasticity Chemical Processing
FKM (Viton®) Standard: -15°F to 437°F (-26°C to 222°C) Vacuum, Most Acids / Chemicals, Oils, Fuels Ketones, Ammonia, Hot Water / Steam Chemical Processing

How to Measure Tri-Clamp Fittings

Tri-Clamp Fittings and Gasket Sizing Guide

Sanitary Fitting Dimensions

Sanitary
Size
Flange
OD (?)
Tube
ID (?)
Tube
OD (?)
1/2″ 0.984 0.370 0.500
3/4″ 0.984 0.620 0.750
1″ 1.984 0.870 1.000
1 1/2″ 1.984 1.370 1.500
2″ 2.516 1.870 2.000
2 1/2″ 3.047 2.370 2.500
3″ 3.579 2.870 3.000
4″ 4.682 3.834 4.000
6″ 6.562 5.782 6.000
8″ 8.602 7.782 8.000
10″ 10.570 9.782 10.000
12″ 12.570 11.760 12.000

Looking for even more information on Tri-Clamp fittings?

We have everything you need. Read "The Ultimate Guide to Tri-Clamp Fittings"

ALTERNATIVE PRODUCT SKUS
A80MPU
A80MP

Additional information

Line Drawings

SKUDescriptionLine Drawing
A80MPU-1

1″ Buna Orifice Plate Gasket w/ .125 Hole

Request Line Drawing
A80MPU-1.5

1 1/2″ Buna Orifice Plate Gasket w/ .125 Hole

Request Line Drawing
A80MPU-2

2″ Buna Orifice Plate Gasket w/ .125 Hole

Request Line Drawing
A80MPU-2.5

2 1/2″ Buna Orifice Plate Gasket w/ .125 Hole

PDF
A80MPU-3

3″ Buna Orifice Plate Gasket w/ .125 Hole

Request Line Drawing
A80MPU-4

4″ Buna Orifice Plate Gasket w/ .125 Hole

Request Line Drawing

    Do you make any with eccentric holes? Or any without the hole, just the plate and gasket?
  1. Q Do you make any with eccentric holes? Or any without the hole, just the plate and gasket?
    A

    We can provide this item without a drill hole in the center.  Please contact us for a detailed quote.

  2. Do you offer custom hole sizes on these gaskets?
  3. Q Do you offer custom hole sizes on these gaskets?
    A Yes, we can help you out with this. Please contact us with additional information for a quote.