Tri-Clamp Hose Adapters (14MPHR)

  • Tri-Clamp Sanitary Hose Barb Adapter
  • Available in 316L Stainless Steel
  • Stamped with Heat Lot Number
  • Creates connection between clamp and rubber hose
  • View Sizes and Dimensions
Clear
Quantity - +

Description

Sanitary hose barb adapters connect tri-clamp process lines with external rubber hoses.

Tri-Clamp style hose adapter is available in both 304 & 316L stainless steel alloy. This product allows for both ease in assembly and breakdown of sanitary line process equipment. The grooved end provides a tight seal for rubber hose connection. Clamp end requires the use of single or double bolt pin along with rubber gasket to complete assembly. Sizing Note: The Outside Diameter (OD) of the Hose Barb should match the Inside Diameter (ID) of your hose for connection purposes. Hoses can be securely attached using a worm clamp. Material Test Reports (MTRs) available upon request.

Rubber Hose Adapters Part Numbers & Dimensions

Tri-Clamp Hose Barb Dimensions Tri-Clamp Hose Barb Adapter Sizes & Dimensions
Size (Tube OD) Part Number Dimensions Line Drawing
304L 316L Hose Size A B
1/2 x 1/8" -- 14MPHR-.50X.125-316 0.125 1.500 0.245 PDF
1/2 x 3/16" -- 14MPHR-.50X.188-316 0.1875 1.500 0.245 PDF
1/2 x 1/4" -- 14MPHR-.50X.25-316 0.250 1.500 0.312 PDF
1/2 x 3/8" -- 14MPHR-.50X.375-316 0.375 1.500 0.405 PDF
1/2" x 1/2" -- 14MPHR-.50-316 0.500 1.500 0.500 PDF
1/2" x 3/4" -- 14MPHR-.50X.75-316 0.500 1.500 0.750 PDF
3/4 x 1/8" -- 14MPHR-.75X.125-316 0.125 1.500 0.245 Request Drawing
3/4 x 3/16" -- 14MPHR-.75X.188X1.5-316 0.1875 1.500 0.245 Request Drawing
3/4 x 1/4" -- 14MPHR-.75X.25-316 0.250 1.500 0.312 Request Drawing
3/4 x 3/8" -- 14MPHR-.75X.375-316 0.375 1.500 0.405 PDF
3/4 x 1/2" -- 14MPHR-.75X.50-316 0.500 1.500 0.405 PDF
3/4" x 3/4" -- 14MPHR-.75-316 0.750 1.500 0.750 PDF
1" 14MPHR-1-304 14MPHR-1-316 1.000 1.688 1.000 PDF
1" x 3/16" NA 14MPHR-1X.188-316 0.1875 1.500 0.312 Request Drawing
1" x 1/4" NA 14MPHR-1X.25-316 0.250 1.500 0.312 PDF
1" x 3/8" 14MPHR-1X.375-304 14MPHR-1X.375-316 0.375 1.500 0.375 PDF
1" x 1/2" 14MPHR-1X.50-304 14MPHR-1X.50-316 0.500 1.500 0.500 PDF
1" x 3/4" 14MPHR-1X.75-304 14MPHR-1X.75-316 0.750 1.500 0.750 PDF
1 1/2 x 3/16" -- 14MPHR-1.5X.188-316 0.1875 1.500 0.245 Request Drawing
1-1/2" x 1/4" 14MPHR-1.5X.25-304 14MPHR-1.5X.25-316 0.25 1.500 0.375 Request Drawing
1-1/2" x 3/8" 14MPHR-1.5X.375-304 14MPHR-1.5X.375-316 0.375 1.500 0.375 PDF
1-1/2" x 1/2" 14MPHR-1.5X.50-304 14MPHR-1.5X.50-316 0.500 1.500 0.500 PDF
1-1/2" x 3/4" 14MPHR-1.5X.75-304 14MPHR-1.5X.75-316 1.500 1.500 0.750 PDF
1-1/2" x 1" 14MPHR-1.5X1-304 14MPHR-1.5X1-316 1.000 1.687 1.000 PDF
1 1/2" x 1 1/2" 14MPHR-1.5-304 14MPHR-1.5-316 1.500 1.500 1.500 PDF
2" x 3/4" NA 14MPHR-2X.75-316 0.750 1.812 0.767 PDF
2" x 1" 14MPHR-2x1-304 14MPHR-2x1-316 2.000 2.312 1.000 Request Drawing
2" x 1 1/2" 14MPHR-2x1.5-304 14MPHR-2x1.5-316 2.000 2.312 1.500 PDF
2 " 14MPHR-2-304 14MPHR-2-316 2.000 2.312 2.000 PDF
2-1/2" -- 14MPHR-2.5-316 2.500 2.344 2.500 PDF
3 " -- 14MPHR-3-316 3.000 3.094 3.000 PDF
4 " -- 14MPHR-4-316 4.000 3.406 4.000 PDF
6 " -- 14MPHR-6-316 6.000 3.406 6.000 PDF
8 " -- 14MPHR-8-316 8.000 3.406 8.000 PDF
 

Watch How to Measure Tri-Clamp Fittings

Tri-Clamp Fittings and Gasket Sizing Guide

Sanitary Fitting Dimensions
Sanitary Size OD of Flange End ID of Tube OD of Tube
1/2″ 0.992 0.370 0.500
3/4″ 0.992 0.620 0.750
1″ 1.984 0.870 1.000
1 1/2″ 1.984 1.370 1.500
2″ 2.516 1.870 2.000
2 1/2″ 3.047 2.370 2.500
3″ 3.579 2.870 3.000
4″ 4.682 3.834 4.000
6″ 6.562 5.782 6.000
8″ 8.602 7.782 8.000
10″ 10.570 9.782 10.000
12″ 12.570 11.760 12.000
14MPHR4-100 14MPHR4-150 14MPHR4-200 14MPHR4-250 14MPHR4-300 14MPHR4-400 14MPHR6-050 14MPHR6-075 14MPHR6-100 14MPHR6-150 14MPHR6-150025 14MPHR6-150050 14MPHR6-150075 14MPHR6-150375 14MPHR6-200 14MPHR6-200050 14MPHR6-200075 14MPHR6-200100 14MPHR6-200150 14MPHR6-250 14MPHR6-300 14MPHR6-400 14MPHR6-600

Questions & Answers 3

Questions and answers of the customers

    How much pressure are these fittings rated for?
  1. Q How much pressure are these fittings rated for?
    A These fittings are restricted with regards to pressure by the types of clamps utilized on both ends. I don't have pressure ratings for clamps on the hose adapter side but I can provide pressure ratings for the tri-clamp side depending upon which clamp is chosen. Please see our Tri-Clamp Selection Guide for pressure ratings per size of clamp.
  2. Do these fittings meet the standard for ASTM A269, ASTM A270 and ASME BPE? Are they bright annealed and under 35 Ra surface roughness? Is there an option for electropolish?
  3. Q Do these fittings meet the standard for ASTM A269, ASTM A270 and ASME BPE? Are they bright anneal...... Read more
    A Yes to ASTM A269, ASTM A270 but "no" to ASME BPE standards. These fittings come standard as 32RA ID/OD but can be polished to 20 or 15Ra if needed.
  4. Do you sell the hoses or other attachments for this product?
  5. Q Do you sell the hoses or other attachments for this product?
    A Unfortunately no we do not carry hoses or other products to secure to the tri-clover rubber hose adapter. Depending upon the pressure in your processing lines you may be able to get away with fitting the hose snug over the adapter coupled with a zip tie or aluminum slip for additional support.

Send me a notification for each new answer.