There are two options for finding your sanitary fitting dimensions:

 

Option 1 | Measure the Outside Diameter (OD) of the tube end:

  • Lay your piece down on a sheet of paper and trace a circle around the outside of the tube end
  • Measure the diameter of the traced circle to determine your piece’s Outside Diameter (OD)

See the included video or reference the guides below to find your sanitary fitting size.

Option 2 | Measure the Outside Diameter (OD) of the flange end:

  • Lay your piece down on a sheet of paper and trace a circle around the outside of the flange end
  • Measure the diameter of the traced circle to determine the Outside Diameter (OD) of the flange end
  • Note: 1″ & 1 1/2″ Sanitary Fittings have the same flange OD. To determine your size, also note the Inside Diameter (ID)

See the illustration below and the associated graph to determine your sanitary fitting size.

Give us a call if you have any questions: (800) 270-8926

Next, use your Outside Diameter (OD) measurement to determine fitting size:

The flange size, which is the same measurement as the outside diameter (OD), is not equal to the sanitary fittings size. In order to determine the correct sanitary fitting size required, please refer to the measurements table or note the Inside/Outside diameters labeled in the illustration below.

1.5" Tri-Clamp Dimensions
Sanitary Size Flange OD ( ? ) ID of Tube ( ? ) OD of Tube ( ? )
1/2″ 0.984 0.370 0.500
3/4″ 0.984 0.620 0.750
1″ 1.984 0.870 1.000
1 1/2″ 1.984 1.370 1.500
2″ 2.516 1.870 2.000
2 1/2″ 3.047 2.370 2.500
3″ 3.579 2.870 3.000
4″ 4.682 3.834 4.000
6″ 6.562 5.782 6.000
8″ 8.602 7.782 8.000
10″ 10.570 9.782 10.000
12″ 12.570 11.760 12.000
Book Cover - The Ultimate Guide - Tri-Clamp Fittings

The most comprehensive guide to tri-clamp fittings anywhere on the internet.
Whether you’re new to the industry or an old pro, this guide has something for everyone.