(800) 270-8926

Stainless Steel Sanitary Fittings

SKUs available on this product page

40MPSU-1.5 #16, 40MPSU-2.5 #80, 40MPSSFY-1.5#20, 42MPSU-3/4 #60, 42MPSU-3/4 #100, 42MPSU-1/2 #60, 42MPSU-1/2 #100, 40MPSE-1-#20, 40MPSSFY-6 #100, 40MPSSFY-3 #40, 40MPSE-3 #40, 40MPSU-2.5, 40MPSU-1.5, 40MPSU-1.5#60, 40MPSU-1.5 #100, 40MPSU-2.5-#60, 40MPSU-2.5-#100, 40MPSU-1.5-#40, 40MPSU-1.5-#20, 40MPSU-2.5-#40, 40MPSU-1.5 #30, 40MPSE-1.5, 40MPSE-1.5 #20, 40MPSE-1.5 #80, 40MPSE-1.5 #40, 40MPSU-1.5 #80, 40MPSU-2.5-#20, 40MPSU-2.5 #12, 40MPSU-2.5 #30, 40MPSU-2.5#60, 40MPSE-2.5, 40MPSE-2.5 #30, 40MPSE-2.5 #40, 40MPSU-4, 40MPSU-3 #10, 40MPSU-2, 40MPSU-1, 40MPSE-1 #20, 40MPVS100-40SS, 40RXPX100-60SS, 40MPGS100-80SS, 40MPSU-1 #60, 40MPSU-1-#100, 40MPS-2-20MESH-TEFLON, 40MPSU-2 #60, 40MPSU-2 #100, 40MPSU-3 #60, 40MPSU-3 #100, 40MPSU-4 #60, 40MPSU-4 #100, 40MPSU-4 #40, 40MPSU-2-#20, 40MPSU-2-#40, 40MPSU-3-#40, 40MPSU-2 #80, 40MPSE-2, 40MPSE-2 #20, 40MPSE-3, 40MPSE-4, 40MPSU-2 #30, 40MPSU-3-#20, 40MPSE-2 #30, 40MPSU-2 #8, 40MPSU-4 #20, 40MPSU-3 #30, 40MPSU-2 #50, 40MPSU-2 #12, 40MPSU-3 #80, 40MPSU-3 #12, 40MPSU-3 #60, 40MPSU-4 #30, 40MPSE-2-#100, 40MPSE-2 #80, 40MPSE-1 #100, 40MPSE-2 #40, 40MPSE-3 #8, 40MPSE-2-#60, 40MPSE-3 #4, 40MPSE-2 #4, 40MPSE-4 #4, 40MPSE-1.5-#100, 40MPSE-2-#16, 40MPSE-2.5 #4, 40MPSE-6 #20, 40MPSSFY-1.5, 40MPSSFY-2, 40MPSSFY-2 #20, 40MPSSFY-3, 40MPSSFY-1.5100, 40MPSSFY-1.5#40, 40MPSSFY-1.5#60, 40MPSSFY-1.5#80, 40MPSSFY-2 #40, 40MPSSFY-3 #4, 40MPSSFY-3 #80, 40MPSSFY-2 #50, 40MPSSFY-2.5, 40MPSU-3, 40MPSU-2 #4, 40MPSU-3 #4, 40MPSU-2 #6, 40MPSU-2-#16, 40MPSU-2.5 #4, 40MPSU-1.5 #14, 40MPSU-1.5 #4, 40MPSU-4 #4, 40MPSU-2.5 #6, 40MPSU-3 #6, 40MPSU-2.5 #16, 40MPSU-4 #16, 40MPSU-1.5 #6, 40MPSXC-1.5 #80, 40MPSX-3 #80,
Tri-Clamp Mesh Screen Gaskets (40MPS)
1″ Buna Mesh Screen Tri Clamp Gasket Profile

Tri-Clamp Mesh Screen Gaskets (40MPS)

Quantity - +

Mesh/screen gaskets improve system performance while filtering out unwanted elements in process lines.

Tri-clamp gaskets are used to make a secure, leak proof connection between clamp fittings. A variety of materials is available for selection depending upon medium used in line processing. Gaskets range in size from 1 inch to 4 inches. Please see Compound Selection Guide for compatibility information.

Achievable benefits while maintaining sanitary conditions. Standard with 1/8” concentric bore.

 

Size
(Tube OD)		 Material
Buna EPDM Teflon® Viton®
1-1/2" 40MPSU-1.5 NA NA NA
2" 40MPSU-2 NA NA NA
2-1/2" 40MPSU-2.5 NA NA NA
3 " 40MPSU-3 NA NA NA
4 " 40MPSU-4 NA NA NA

Mesh to Micron Conversion Table

U.S. MESH INCHES MICRONS MILLIMETERS
3 0.265 6730 6.73
4 0.187 4760 4.76
5 0.157 4000 4
6 0.132 3360 3.36
7 0.111 2830 2.83
8 0.0937 2380 2.38
10 0.0787 2000 2
12 0.0661 1680 1.68
14 0.0555 1410 1.41
16 0.0469 1190 1.19
18 0.0394 1000 1
20 0.0331 841 0.841
25 0.028 707 0.707
30 0.0232 595 0.595
35 0.0197 500 0.5
40 0.0165 400 0.4
45 0.0138 354 0.354
50 0.0117 297 0.297
60 0.0098 250 0.25
70 0.0083 210 0.21
80 0.007 177 0.177
100 0.0059 149 0.149
120 0.0049 125 0.125
140 0.0041 105 0.105
170 0.0035 88 0.088
200 0.0029 74 0.074
230 0.0024 63 0.063
270 0.0021 53 0.053
325 0.0017 44 0.044
400 0.0015 37 0.037

Tri-Clamp Gasket Comparison Guide

Gasket Temperature Range Recommended Usage Not Recommended Industry
Buna (Nitrile) Standard: -35°F to 250°F (-37°C to 121°C) Water, Oils, Fuels Ketones, Strong Acids, Sunlight, Ozone, Weathering Food & Beverage
EPDM (Ethylene Propylene) Standard: -65°F to 300°F (-54°C to 149°C) Sunlight, Weathering, Hot Water, Steam, Select Acids/Bases, Alcohols Oils, Fuels Bio-Pharmaceutical, Food & Beverage, Drinking Water
PTFE (Teflon®) Standard: -250°F to 450°F (-157°C to 232°C) Chemical, Heat, Pressure Applications Stretching, Elasticity Chemical Processing
FKM (Viton®) Standard: -15°F to 437°F (-26°C to 222°C) Vacuum, Most Acids / Chemicals, Oils, Fuels Ketones, Ammonia, Hot Water / Steam Chemical Processing

How to Measure Tri-Clamp Fittings

Tri-Clamp Fittings and Gasket Sizing Guide

Sanitary Fitting Dimensions

Sanitary
Size		 Flange
OD (?) 		Tube
ID (?) 		Tube
OD (?)
1/2″ 0.984 0.370 0.500
3/4″ 0.984 0.620 0.750
1″ 1.984 0.870 1.000
1 1/2″ 1.984 1.370 1.500
2″ 2.516 1.870 2.000
2 1/2″ 3.047 2.370 2.500
3″ 3.579 2.870 3.000
4″ 4.682 3.834 4.000
6″ 6.562 5.782 6.000
8″ 8.602 7.782 8.000
10″ 10.570 9.782 10.000
12″ 12.570 11.760 12.000

Looking for even more information on Tri-Clamp fittings?

We have everything you need. Read "The Ultimate Guide to Tri-Clamp Fittings"

SKUs Available to purchase on this page:
40MPSU-3 #100
40MPSU-3 #60
40MPSU-4 #40
40MPSU-4 #60
40MPSU-4 #100
40MPSU-1.5-#40
40MPSU-2-#20
40MPSU-2-#40
40MPSU-1.5-#20
40MPSU-3-#40
40MPSU-2.5-#40
40MPSE-2 #20
40MPSU-1.5 #30
40MPSU-2 #80
40MPSE-2
40MPSE-1.5
40MPSE-4
40MPSE-3
40MPSE-1.5 #20
40MPSE-1.5 #40
40MPSU-2 #30
40MPSU-3-#20
40MPSE-2 #30
40MPSU-2 #8
40MPSU-1.5 #80
40MPSU-4 #20
40MPSU-3 #30
40MPSU-2 #50
40MPSU-2.5 #12
40MPSU-2.5 #30
40MPSU-2 #12
40MPSU-2.5#60
40MPSU-3 #80
40MPSE-3 #4
40MPSE-2 #4
40MPSE-4 #4
40MPSE-1.5-#100
40MPSSFY-2
40MPSE-2-#16
40MPSE-2.5 #4
40MPSE-6 #20
40MPSSFY-1.5
40MPSU-1
40MPVS100-40SS
40RXPX100-60SS
40MPGS100-80SS
40MPSU-1 #60
40MPSU-1-#100
40MPS-2-20MESH-TEFLON
40MPSU-1.5#60
40MPSU-1.5 #100
40MPSU-2 #60
40MPSU-2 #100
40MPSU-2.5-#60
40MPSE-2 #40
40MPSE-2.5 #30
40MPSE-3 #8
40MPSU-3 #60
40MPSU-4 #30
40MPSE-2.5
40MPSE-2 #80
40MPSU-3 #12
40MPSU-2.5-#20
40MPSE-1.5 #80
40MPSSFY-3
40MPSSFY-1.5100
40MPSSFY-1.5#40
40MPSSFY-1.5#60
40MPSSFY-1.5#80
40MPSSFY-2 #40
40MPSSFY-3 #4
40MPSSFY-3 #80
40MPSSFY-2 #50
40MPSSFY-2.5
40MPSU-3
40MPSU-2 #4
40MPSU-3 #4
40MPSU-2 #6
40MPSU-2-#16
40MPSU-2.5 #4
40MPSU-1.5 #14
40MPSU-1.5 #4
40MPSU-4 #4
40MPSU-2.5 #6
40MPSU-3 #6
40MPSU-2.5 #16
40MPSU-4 #16
40MPSU-1.5 #6
40MPSXC-1.5 #80
40MPSX-3 #80
40MPSU-4
40MPSU-3 #10
40MPSU-2
40MPSU-2.5
40MPSU-1.5
40MPSU-2.5-#100
40MPSE-1 #20
40MPSSFY-2 #20
40MPSE-2-#100
40MPSE-1 #100
40MPSE-2.5 #40
40MPSE-2-#60
40MPSE-3 #40
40MPSSFY-3 #40

Additional information

    I am looking to build a vacuum attachment so I can vacuum through a 10-mesh screen with a plant vacuum system. is this something you can help me source parts to complete?
  1. Q I am looking to build a vacuum attachment so I can vacuum through a 10-mesh screen with a plant v...... Read more
    A Unfortunately, we do not offer vacuum fittings.  The folks at Ideal Vacuum may be able to lend a hand.
    2. Do you offer the 2" screens in a smaller mesh size? Thanks , Frank
  2. Q Do you offer the 2" screens in a smaller mesh size? Thanks , Frank
    A Hi, Frank. We just added two more mesh screen gaskets for 2" and other sizes for BUNA material. The mesh sizes added were 60# and 100#. Please let me know if you need any other varieties and I can send you a quote.

Related products