Reducing Weld Tee Tri-Clamp Branch (S7RWWK)
- Sanitary Weld Reducing Tee w/ Tri-Clamp Branch
- Available in 316L Stainless Steel
- Surface Finish PL SF1 / PM SF4
- 3-A Sanitary Standards for Sanitary Fittings, Number 63-03
- View Sizes and Dimensions
The stainless steel weld reducing tee with Tri-Clamp Branch allows for the connection of three separate tubes of varying sizes
Available in 316L alloy options along with a wide variety of end-to-end connections. Clamp fittings allow for easy, on the job disassembly in order to clean in place.
Material Test Reports (MTRs) available upon request.
Weld Run x Tri-Clamp Branch Reducing Tee Dimensions
Part Number | Size | A | B | C |
S7RWWK-.75X.50 | 3/4 X 1/2 | 2 | 4 | 2.5 |
S7RWWK-1X.50 | 1 X 1/2 | 2.125 | 4.25 | 2.625 |
S7RWWK-1X.75 | 1 X 3/4 | 2.125 | 4.25 | 2.625 |
S7RWWK-1.5X.50 | 1-1/2 X 1/2 | 2.375 | 4.75 | 2.875 |
S7RWWK-1.5X.75 | 1-1/2 X 3/4 | 2.375 | 4.75 | 2.875 |
S7RWWK-1.5X1 | 1-1/2 X 1 | 2.375 | 4.75 | 2.875 |
S7RWWK-2X.50 | 2 X 1/2 | 2.875 | 5.75 | 3.125 |
S7RWWK-2X.75 | 2 X 3/4 | 2.875 | 5.75 | 3.125 |
S7RWWK-2X1 | 2 X 1 | 2.875 | 5.75 | 3.125 |
S7RWWK-2X1.5 | 2 X 1-1/2 | 2.875 | 5.75 | 3.125 |
S7RWWK-2.5X.50 | 2-1/2 X 1/2 | 3.125 | 6.25 | 3.375 |
S7RWWK-2.5X.75 | 2-1/2 X 3/4 | 3.125 | 6.25 | 3.375 |
S7RWWK-2.5X1 | 2-1/2 X 1 | 3.125 | 6.25 | 3.375 |
S7RWWK-2.5X15 | 2-1/2 X 1-1/2 | 3.125 | 6.25 | 3.375 |
S7RWWK-2.5X2 | 2-1/2 X 2 | 3.125 | 6.25 | 3.375 |
S7RWWK-3X.50 | 3 X 1/2 | 3.375 | 6.75 | 3.625 |
S7RWWK-3X.75 | 3 X 3/4 | 3.375 | 6.75 | 3.625 |
S7RWWK-3X1 | 3 X 1 | 3.375 | 6.75 | 3.625 |
S7RWWK-3X1.5 | 3 X 1-1/2 | 3.375 | 6.75 | 3.625 |
S7RWWK-3X2 | 3 X 2 | 3.375 | 6.75 | 3.625 |
S7RWWK-3X2.5 | 3 X 2-1/2 | 3.375 | 6.75 | 3.625 |
S7RWWK-4X.50 | 4 X 1/2 | 4.125 | 8.25 | 4.125 |
S7RWWK-4X.75 | 4 X 3/4 | 4.125 | 8.25 | 4.125 |
S7RWWK-4X1 | 4 X 1 | 4.125 | 8.25 | 4.125 |
S7RWWK-4X1.5 | 4 X 1-1/2 | 4.125 | 8.25 | 4.125 |
S7RWWK-4X2 | 4 X 2 | 4.125 | 8.25 | 4.375 |
S7RWWK-4X2.5 | 4 X 2-1/2 | 4.125 | 8.25 | 4.375 |
S7RWWK-4X3 | 4 X 3 | 4.125 | 8.25 | 4.375 |
S7RWWK-6X3 | 6 X 3 | 5.625 | 11.25 | 5.375 |
S7RWWK-6X4 | 6 X 4 | 5.625 | 11.25 | 5.75 |
How to Measure Tri-Clamp Fittings
Tri-Clamp Fittings and Gasket Sizing Guide
Sanitary Size |
Flange OD (?) |
Tube ID (?) |
Tube OD (?) |
---|---|---|---|
1/2″ | 0.984 | 0.370 | 0.500 |
3/4″ | 0.984 | 0.620 | 0.750 |
1″ | 1.984 | 0.870 | 1.000 |
1 1/2″ | 1.984 | 1.370 | 1.500 |
2″ | 2.516 | 1.870 | 2.000 |
2 1/2″ | 3.047 | 2.370 | 2.500 |
3″ | 3.579 | 2.870 | 3.000 |
4″ | 4.682 | 3.834 | 4.000 |
6″ | 6.562 | 5.782 | 6.000 |
8″ | 8.602 | 7.782 | 8.000 |
10″ | 10.570 | 9.782 | 10.000 |
12″ | 12.570 | 11.760 | 12.000 |
Looking for even more information on Tri-Clamp fittings?
We have everything you need. Read "The Ultimate Guide to Tri-Clamp Fittings"
Additional information
Line Drawings
SKU | Description | Line Drawing |
---|---|---|
7RMP6-250150-1 | 2 1/2″ x 1-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-.75X.50-PL-316 | 3/4″ x 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-.75X.50-PM-316 | 3/4″ x 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-1.5X.50-PL-316 | 1 1/2″ x 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-1.5X.50-PM-316 | 1-1/2″ x 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-1.5X.75-PL-316 | 1 1/2″ x 3/4″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-1.5X.75-PM-316 | 1-1/2″ x 3/4″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-1.5X1-PL-316 | 1-1/2″ x 1″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-1.5X1-PM-316 | 1-1/2″ x 1″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-1X.50-PL-316 | 1″ x 1/2″ Butt-Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-1X.50-PM-316 | 1″ x 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-1X.75-PL-316 | 1″ x 3/4″ Butt-Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-1X.75-PM-316 | 1″ x 3/4″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-2.5X.50-PL-316 | 2 1/2″ x 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-2.5X.75-PL-316 | 2 1/2″ x 3/4″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-2.5X.75-PM-316 | 2 1/2″ x 3/4″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-2.5X1-PL-316 | 2 1/2″ x 1″ Butt-Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-2.5X1-PM-316 | 2 1/2″ x 1″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-2.5X1.5-PL-316 | 2 1/2″ x 1 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-2.5X1.5-PM-316 | 2 1/2″ x 1-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-2.5X2-PL-316 | 2 1/2″ x 2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-2.5X2-PM-316 | 2-1/2″ x 2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-2X.50-PL-316 | 2″ x 1/2″ Butt-Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-2X.50-PM-316 | 2″ x 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-2X.75-PL-316 | 2″ x 3/4″ Butt-Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-2X.75-PM-316 | 2″ x 3/4″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-2X1-PL-316 | 2″ x 1″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
|
S7RWWK-2X1-PM-316 | 2″ x 1″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
|
S7RWWK-2X1.5-PL-316 | 2″ x 1-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-2X1.5-PM-316 | 2″ x 1-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-3X.50-PL-316 | 3″ x 1/2″ Butt-Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-3X.50-PM-316 | 3″ x 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-3X.75-PL-316 | 3″ x 3/4″ Butt-Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-3X.75-PM-316 | 3″ x 3/4″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-3X1-PL-316 | 3″ x 1″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-3X1-PM-316 | 3″ x 1″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-3X1.5-PL-316 | 3″ x 1-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-3X1.5-PM-316 | 3″ x 1-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-3X2-PL-316 | 3″ x 2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-3X2-PM-316 | 3″ x 2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-3X2.5-PL-316 | 3″ x 2-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-3X2.5-PM-316 | 3″ x 2-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-4X.50-PL-316 | 4″ x 1/2″ Butt-Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-4X.50-PM-316 | 4″ x 1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-4X.75-PL-316 | 4″ x 3/4″ Butt-Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-4X.75-PM-316 | 4″ x 3/4″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-4X1-PL-316 | 4″ x 1″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-4X1-PM-316 | 4″ x 1″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-4X1.5-PL-316 | 4″ x 1-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-4X1.5-PM-316 | 4″ x 1-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-4X2-PL-316 | 4″ x 2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
|
S7RWWK-4X2-PM-316 | 4″ x 2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
|
S7RWWK-4X2.5-PL-316 | 4″ x 2-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-4X2.5-PM-316 | 4″ x 2-1/2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-4X3-PL-316 | 4″ x 3″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-4X3-PM-316 | 4″ x 3″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-6X2-PL-316 | 6″ x 2″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-6X2-PM-316 | 6″ x 2″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-6X3-PL-316 | 6″ x 3″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-6X3-PM-316 | 6″ x 3″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
S7RWWK-6X4-PL-316 | 6″ x 4″ Weld Reducing Tee w/ Tri-Clamp Branch, PL/SF1, 316 |
Request Line Drawing |
S7RWWK-6X4-PM-316 | 6″ x 4″ Weld Reducing Tee w/ Tri-Clamp Branch, PM/SF4, 316 |
Request Line Drawing |
There are no questions yet. Be the first to ask a question about this product.