45º Tri-Clamp Elbow (2KMP)
- Tri-Clamp 45º Elbow
- Available in 304 & 316L Stainless Steel
- Surface Finish: 32Ra (20Ra and 15Ra Available)
- 3-A Sanitary Standards for Sanitary Fittings, Number 63-03
- View Sizes and Dimensions
Securely connect separate sanitary line feeds with stainless steel 45º tri-clamp elbow
The 45 degree tri-clamp elbow is available in both 304 and 316L alloy, stainless steel. Clamp adapters such as the single pin heavy duty clamp with wing nut or bolted clamp along with a rubber gasket should be used to properly secure joining ends.
This product is 3A certified for sanitary-grade line process equipment. Suitable for use in food, beverage and pharmaceutical applications.
3-A Sanitary Standards Inc. certifies products meet FDA and USDA regulations to prevent contamination in food, beverage, dairy, and pharmaceutical manufacturing environments.
| Part Number Cross Reference | |||||||
|---|---|---|---|---|---|---|---|
| Sanitary Fittings | Alfa Laval | Dixon | Sanitary Solutions | Sanitube | Steel & O'Brien | VNE | Wayland |
| 2KMP | 2KMP | 2KMP | SS2KMP | 2KMP | 2KMP | EG2K | W2KMP |
How to Measure Tri-Clamp Fittings
Tri-Clamp Fittings and Gasket Sizing Guide
| Sanitary Size |
Flange OD (?) |
Tube ID (?) |
Tube OD (?) |
|---|---|---|---|
| 1/2″ | 0.984 | 0.370 | 0.500 |
| 3/4″ | 0.984 | 0.620 | 0.750 |
| 1″ | 1.984 | 0.870 | 1.000 |
| 1 1/2″ | 1.984 | 1.370 | 1.500 |
| 2″ | 2.516 | 1.870 | 2.000 |
| 2 1/2″ | 3.047 | 2.370 | 2.500 |
| 3″ | 3.579 | 2.870 | 3.000 |
| 4″ | 4.682 | 3.834 | 4.000 |
| 6″ | 6.562 | 5.782 | 6.000 |
| 8″ | 8.602 | 7.782 | 8.000 |
| 10″ | 10.570 | 9.782 | 10.000 |
| 12″ | 12.570 | 11.760 | 12.000 |
Looking for even more information on Tri-Clamp fittings?
We have everything you need. Read "The Ultimate Guide to Tri-Clamp Fittings"
Additional information
Line Drawings
| SKU | Description | Line Drawing |
|---|---|---|
| 2KMP-.50-316 | 1/2″ Clamp 45° Elbow |
|
| 2KMP-.75-316 | 3/4″ Clamp 45° Elbow |
|
| 2KMP-1-304 | 1″ Clamp 45° Elbow – 316L |
|
| 2KMP-1-316 | 1″ Clamp 45° Elbow – 316L |
|
| 2KMP-1.5-304 | 1-1/2″ Clamp 45° Elbow – 304L |
|
| 2KMP-1.5-316 | 1-1/2″ Clamp 45° Elbow – 316L |
|
| 2KMP-2-304 | 2″ Clamp 45° Elbow – 304L |
|
| 2KMP-2-316 | 2″ Clamp 45° Elbow – 316L |
|
| 2KMP-2.5-304 | 2-1/2″ Clamp 45° Elbow – 304L |
|
| 2KMP-2.5-316 | 2-1/2″ Clamp 45° Elbow – 316L |
|
| 2KMP-3-304 | 3″ Clamp 45° Elbow – 304L |
|
| 2KMP-3-316 | 3″ Clamp 45° Elbow – 316L |
|
| 2KMP-4-304 | 4″ Clamp 45° Elbow – 304L |
|
| 2KMP-4-316 | 4″ Clamp 45° Elbow – 316L |
|
| 2KMP-6-304 | 6″ Clamp 45° Elbow – 304L |
|
| 2KMP-6-316 | 6″ Clamp 45° Elbow – 316L |
|
| 2KMP-8-304 | 8″ Clamp 45° Elbow – 304L |
|
| 2KMP-8-316 | 8″ Clamp 45° Elbow – 316L |
-
I'm processing milk through these fittings. What type of alloy and gasket do you recommend?
-
Q I'm processing milk through these fittings. What type of alloy and gasket do you recommend?A For any media processing questions always consult our compound selection guide which can be found on our clamp gasket product page. In the case of milk, a non-corrosive liquid, you are free to select any of our choices available for gaskets. In this case the cheapest selection available will suit your needs just fine. The same logic holds true for stainless steel alloy selection. The 304 option is going to be cheaper than our 316L version and should be perfectly suitable for the processing of milk. Thanks for your question!
