CIP Spray Balls (SBSA)

  • Stationary CIP Spray Ball
  • Available in 316L Stainless Steel alloy
  • Mounted on to process-line tubing
  • Available in multiple spray patterns
Quantity - +

Polished stainless steel clean-in-place spray balls are used to clean process tanks with a variety of patterns

Tube ends of spray ball is slightly larger than noted Tube OD to slip over butt-weld end. Locking pin (included) holds stationary spray ball in place.
Spray Ball Patterns

SPECS
3/4" x 2" Spray Ball
1" x 2 1/2" Spray Ball
1 1/2" x 2 1/2" Spray Ball
1 1/2" x 3 1/2" Spray Ball
2" x 2 1/2" Spray Ball

 

Part Numbers & Dimensions

Size(Tube OD) x Ball Size Spray Pattern Part Number Dimensions
A B C D
1" x 2 1/2" A - 360 Degrees SBSA-1X25 1.109 1.031 3.500 2.500
1 1/2" x 2 1/2" A - 360 Degrees SBSA-15X25 1.672 1.563 3.500 2.500
1 1/2" x 3 1/2" A - 360 Degrees SBSA-15X35 1.672 1.563 4.750 2.500

Additional information

Line Drawings

SKUDescriptionLine Drawing
SBSA-.75X2-316-O

3/4″ Tube OD x 2″ Slip-On Spray Ball, 360 Pattern

Request Line Drawing
SBSA-1.5X2.5-316

1 1/2″ Tube OD x 2 1/2″ Spray Ball, 360 Pattern

Request Line Drawing
SBSA-15X25-C

1 1/2″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Lower

Request Line Drawing
SBSA-15X25-D

1 1/2″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Side

Request Line Drawing
SBSA-15X35-316-O

1 1/2″ Tube OD x 3 1/2″ Spray Ball, 360 Pattern

Request Line Drawing
SBSA-15X35-B

1 1/2″ Tube OD x 3 1/2″ Spray Ball, 180 Degrees Upper

Request Line Drawing
SBSA-15X35-C

1 1/2″ Tube OD x 3 1/2″ Spray Ball, 180 Degrees Lower

Request Line Drawing
SBSA-15X35-D

1 1/2″ Tube OD x 3 1/2″ Spray Ball, 180 Degrees Side

Request Line Drawing
SBSA-1X2.5-316

1″ Tube OD x 2 1/2″ Spray Ball, 360 Pattern

Request Line Drawing
SBSA-1X25-B

1″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Upper

Request Line Drawing
SBSA-1X25-C

1″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Lower

Request Line Drawing
SBSA-1X25-D

1″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Side

Request Line Drawing
SBSA-2X25-316-F

2″ Tube OD x 2 1/2″ Slip-On Spray Ball, 360 Pattern

PDF
SBSB-1.5X2.5-316

1 1/2″ Tube OD x 2 1/2″ Spray Ball, 180 Degrees Upper

Request Line Drawing

    Do they come in FMPT or MPT?
  1. Q Do they come in FMPT or MPT?
    A These spray balls slide over existing tubing and are secured with a pin. Due to this configuration, we are unable to add any kind of alternative connection to them.
  2. Do you have flow rate/pressure curves for this spray ball?
  3. Q Do you have flow rate/pressure curves for this spray ball?
    A

    We do not have flow rate/pressure curves for our spray balls.  The typical gallons per minute for these items is 40GPM.  The average pressure is around 25PSI.

  4. Do spray balls come with MTRs?
  5. Q Do spray balls come with MTRs?
    A Yes, our spray balls do come with Material Test Reports (MTRs) upon request.
  6. Are these spray balls 3A certified?
  7. Q Are these spray balls 3A certified?
    A Our spray balls are not manufactured in accordance with 3A Standards.

Send me a notification for each new answer.