Heavy Wall Tank Weld Ferrule (14MPW)
- Sanitary Heavy Duty Tank Weld Ferrules (ASME Material)
- Available in 304 & 316L Stainless Steel
- 3-A Sanitary Standards for Sanitary Fittings, Number 63-03
- Surface Finish: 32Ra
- View Sizes and Dimensions
Heavy wall tank weld ferrules are made of ASME certified material.
Available in 316 stainless steel alloy and a variety of tube diameter sizes. This product is manufactured in accordance with 3A Specifications for standards required by food, beverage and dairy processing equipment.
3-A Sanitary Standards Inc. certifies products meet FDA and USDA regulations to prevent contamination in food, beverage, dairy, and pharmaceutical manufacturing environments.
Part Number Reference Guide
How to Measure Tri-Clamp Fittings
Tri-Clamp Fittings and Gasket Sizing Guide
Sanitary Size |
Flange OD (?) |
Tube ID (?) |
Tube OD (?) |
---|---|---|---|
1/2″ | 0.984 | 0.370 | 0.500 |
3/4″ | 0.984 | 0.620 | 0.750 |
1″ | 1.984 | 0.870 | 1.000 |
1 1/2″ | 1.984 | 1.370 | 1.500 |
2″ | 2.516 | 1.870 | 2.000 |
2 1/2″ | 3.047 | 2.370 | 2.500 |
3″ | 3.579 | 2.870 | 3.000 |
4″ | 4.682 | 3.834 | 4.000 |
6″ | 6.562 | 5.782 | 6.000 |
8″ | 8.602 | 7.782 | 8.000 |
10″ | 10.570 | 9.782 | 10.000 |
12″ | 12.570 | 11.760 | 12.000 |
Looking for even more information on Tri-Clamp fittings?
We have everything you need. Read "The Ultimate Guide to Tri-Clamp Fittings"
Additional information
-
Can you tell me the pressure rating of the 14MPW-4-316 in size 4”. Also what is the actual wall thickness of this fitting and are they available in longer lengths?
-
Q Can you tell me the pressure rating of the 14MPW-4-316 in size 4”. Also what is the actual wall t...... Read moreA So the pressure ratings are based off of the clamp used to secure the fitting as this is the weak point.
Our highest rated pressure clamp is the Double-Pin Heavy Duty Clamp. The 4" version has a pressure rating of 800PSI at 70-F and 600PSI at 250-F.
Regarding wall thickness, the 4" version has a wall thickness of 0.2110". We can always cut these shorter if needed but by standard, the overall length for the 4" fitting is 2.125".
In what way are these fittings ASME certified? Do they have pressure and temperature ratings? Were they verified with UG 101 of ASME BPVC VIII-1 or a stess analysis per ASME BPVC VIII-2?
-
Q In what way are these fittings ASME certified? Do they have pressure and temperature ratings? Wer...... Read moreA
Our 14MPW ASME heavy-wall ferrules are made from ASME material, they are not a certified ASME fitting. I can see the confusion this may have caused so I have updated the language on our website concerning this fitting.
Hello,
Can you provide dimensional data for the 10" Heavy-Wall Ferrule? 14MPW-10-316
Thanks
-
Q Hello, Can you provide dimensional data for the 10" Heavy-Wall Ferrule? 14MPW-10-316 ThanksA
Sure thing. Please see the following link for 10" Heavy Wall Tank Ferrule Dimensions.
Is it best to drill a hole large enough to slip the ferrule through or drill a hole equal to the OD so the ferrule sits on the surface of the tank?
-
Q Is it best to drill a hole large enough to slip the ferrule through or drill a hole equal to the ...... Read moreA This is a sticky question for us to answer. We are not a tank engineering firm, and in order to avoid any injury or insurance issues, we cannot answer those types of questions. Your best bet would be to contact a certified welder with knowledge in the tank industry who can understand your exact application needs. I apologize for not being able to provide a more detailed answer at the moment.