Swivel Joint Double-Pin Clamp (A12MPS)
Swivel Joint Double-Pin Clamp (A12MPS)
- Tri-Clamp Double-Pin Swivel Joint Clamp
- Clamps are available in both 304 Stainless Steel.
- Teflon Collar, PTFE/EPDM Envelope Gasket
- Pressure ratings assume wing nut tightened to 25 in/lb of torque.
- View Sizes and Dimensions
Description
Securely connect tri-clamp ends with heavy-duty, stainless steel swivel clamp (A12MPS)
The double-pin heavy-duty clamp with a wingnut is made from 304 stainless steel alloy (Also available in 316). It is used to join two separate tri-clamp ends to one another. Sizes on this product range from 1 inch all the way up to 4 inches in diameter. A tri-clamp rubber gasket should be placed between the two flange ends to ensure proper fit and secure connection. Do not over-tighten wing-nut as this may damage the product. The recommended amount of tension is to tighten the wing-nut until it becomes snug, then perform one more half twist for the proper amount.Swivel Joint Clamp w/ Wing Nut Part Numbers & Dimensions
| Size (Tube OD) | Part Number | Service Pressure Rating at 70°F | Dimension (A) | |
|---|---|---|---|---|
| 304 | ||||
| 1" - 1 1/2" | A12MPS-1-304 | 50 | 2.122 | |
| 2" | A12MPS-2-304 | 50 | 2.654 | |
| 2-1/2" | A12MPS-2.5-304 | 50 | 3.185 | |
| 3" | A12MPS-3-304 | 50 | 3.717 | |
| 4" | A12MPS-4-304 | 50 | 4.820 |
Watch How to Measure Tri-Clamp Fittings
Tri-Clamp Fittings and Gasket Sizing Guide
| Sanitary Size | OD of Flange End | ID of Tube | OD of Tube |
|---|---|---|---|
| 1/2″ | 0.992 | 0.370 | 0.500 |
| 3/4″ | 0.992 | 0.620 | 0.750 |
| 1″ | 1.984 | 0.870 | 1.000 |
| 1 1/2″ | 1.984 | 1.370 | 1.500 |
| 2″ | 2.516 | 1.870 | 2.000 |
| 2 1/2″ | 3.047 | 2.370 | 2.500 |
| 3″ | 3.579 | 2.870 | 3.000 |
| 4″ | 4.682 | 3.834 | 4.000 |
| 6″ | 6.562 | 5.782 | 6.000 |
| 8″ | 8.602 | 7.782 | 8.000 |
| 10″ | 10.570 | 9.782 | 10.000 |
| 12″ | 12.570 | 11.760 | 12.000 |
Questions & Answers
Questions and answers of the customers
There are no questions yet. Be the first to ask a question about this product.
